| Bore Ranges: | |
|---|---|
| Stroke Range: | |
| Adjustment stroke: | |
Product Description
1. The excellent running performance and long service life.
2. Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes.
3. Piston rod with internal or external thread.
4. Magnetic piston for position sensing.
5. A wide range of variants for customized applications, for example, smooth running, corrosion, or chemical resistance are required.
* Bore diameters from 8 to 25 mm are in conformance with ISO 6432.
Product Specifications
| Bore(mm) | 8 | 10 | 12 | 16 | 20 | |
| Acting type | Double acting, Single acting | |||||
| Working medium | Clean air(40um Filteration) | |||||
| Working pressure | 0.15 to 1.0Mpa | 0.1-1.0Mpa | ||||
| Working temperature | -20 to 80℃ | |||||
| Lubrication | No required | |||||
| Speed range | - | 10 to 100mm/s | ||||
| Cushion type | DSNU-□-P | Elastic cushion rings | ||||
| DSNU-□-PPV | - | Adjustable cushion | ||||
| DSNU-□-PPS | － | Self-adjustable cushion | ||||
| Cushion stroke | DSNU-□-PPV | － | 9mm | 12mm | 15mm | |
| DSNU-□-PPS | - | 12mm | 15mm | |||
| Port size | M5 | M5 | M5 | M5 | G1/8 | |
| Piston rod thread | M4 | M4 | M6 | M6 | M8 | |
| Mounting type | Direct mounting (variant MH only) | |||||
| With accessories | ||||||
| Bore(mm) | 25 | 32 | 40 | 50 | 63 | |
| Acting type | Double acting, Single acting | |||||
| Working medium | Clean air(40um Filteration) | |||||
| Working pressure | 0.1-1.0Mpa | |||||
| Working temperature | -20 to 80℃ | |||||
| Lubrication | No required | |||||
| Speed range | 10 to 100mm/s | 8 to 100mm/s | 5 to 100mm/s | |||
| Cushion type | DSNU-□-P | Elastic cushion rings | ||||
| DSNU-□-PPV | Adjustable cushion | |||||
| DSNU-□-PPS | Self-adjustable cushion | |||||
| Cushion stroke | DSNU-□-PPV | 17mm | 14mm | 18mm | 20mm | 21mm |
| DSNU-□-PPS | 17mm | 14mm | 18mm | 20mm | 21mm | |
| Port size | G1/8 | G1/8 | G1/4 | G1/4 | G3/8 | |
| Piston rod thread | M10×1.25 | M10×1.25 | M12×1.25 | M16×1.5 | M16×1.5 | |
| Mounting type | Direct mounting (variant MH only) | |||||
| With accessories | ||||||
Main Dimensions
Product FAQ
Q1. What is the ISO standard for the pneumatic cylinder?
The ISO 6432 cylinder standard refers to the dimensions of the basic product and the size of the cylinder when mountings and accessories are applied.
Q2. What is stroke size in pneumatic cylinder?
The cylinders are available in bores of 8, 10, 12, 16, 20, 25, 32, 40, 50 and 63 mm, with stroke lengths from 1 mm to 500mm. Single-acting cylinders with spring return in the retract direction are available in stroke lengths up to 50 mm.
Q3. How do I increase the pressure in my pneumatic cylinder?
Another way to increase or decrease the forces generated by the cylinder is to choose a cylinder with either a more significant (Greater force) or smaller (Less force) diameter. Remember, the larger the diameter, the greater the surface area of the piston, and the greater the pressure.
Q4. How do you adjust air cylinder speed?
When the cylinder piston extends, the air behind it is compressed because air can't escape easily. When you tighten the flow control screw, the movement of the piston slows down because air is restricted even further. Controls the speed of a cylinder or restricts air flow. Simply turn the needle valve to adjust air speed.
Q5. How do you calculate pneumatic cylinder force?
Use the cylinder diameter (d) to calculate the cylinder working area (A), which is A = π × d² / 4.
Determine the working pressure (P) inside the cylinder.
Multiply the pressure (P) by the area (A). In that way, you calculate the pneumtaic cylinders theory push force (F), F = P × A.
◆ pneumatic cylinder force calculator
Q6. Do you sell pneumatic cylinder repair kits?
Yes, we sell all types of cylinder repair kits and other accessories. Please get in touch with us if you need any.
Catalogue PDF
English
