VBA Booster regulator's main function is to push the air in the system from low pressure to high pressure for compression and pressurization, thus increasing the system pressure. It is widely used in pneumatic systems and equipment requiring high pressure supply.

The main function of the magnetic reed switch is to check the operation of the cylinder piston so that the piston rod can be fixed and stopped at a certain position. It is usually used in conjunction with a solenoid valve to detect the position of the cylinder and complete the movement of the cylinder.

Pneumatic cylinders are an important part of industrial automation, mainly through the expansion and contraction movement to complete the action requirements in mechanical equipment.

MIP and FIP are 60-degree tapered threads that meet National Pipe Thread standards and can be used in combination. MPI. FIP. and NPT threads are compatible with each other in typical applications.

The pneumatic solenoid valve is mainly composed of a valve body, valve spool, spring and solenoid coil. When the solenoid coil is energized with an electrical current, it creates a magnetic field. This field moves a plunger or armature inside the valve, changing the position of the valve and allowin

An electronic pneumatic regulator is a device designed to control the pressure of compressed air or gas in a pneumatic system. It operates by receiving an electronic input signal, typically from a programmable logic controller (PLC) or similar device, and adjusts the pneumatic output to match the input signal proportionally. Electronic regulators are used where continuous or stepless adjustment of gas pressure is required.