Home / Products / Vacuum Products / PSE560 Series Pressure Sensor For General Fluids
PSE560 Series Pressure Sensor For General Fluids PSE560 Series Pressure Sensor For General Fluids

loading

PSE560 Series Pressure Sensor For General Fluids

Share to:
PSE560 and PSE564 are remote pressure sensors with an analogue V or mA signal output. PSE56* sensors measure the pressure of any liquid or gas in non-corrosive to stainless steel 316L.
  • PSE560

  • VPC Pneumatic

  • 8481804090

Working medium:
Set pressure range:
Enclosure rating:
Availability:

Product Description

 Product Feature

1. PSE560 is for a standard pneumatic system's pressure range, while the PSE564 model is for low pressure.

2. General purpose remote pressure sensor for liquid or gas at 1 MPa or less.

3. Includes a fixed cable with field wired connector option.

4. Oil-free (single diaphragm construction), Enclosure rating IP65.


smc vacuum sensor


 Option/Part No.

Description Part No. Material Note
Connector for pressure sensor controller ZS-28-C 1pc.
Adapter with restrictor Rc1/4 ZS-31-X175 stainless steel 304 1pc.
Adapter with restrictor NPT1/4 ZS-31-X186 1pc.
Adapter with restrictor Rc1/8 ZS-31-X188 1pc.
Adapter with restrictor NPT1/8 ZS-31-X189 1pc.
Orifice M5 ZS-48-A stainless steel 303 1pc.


Product Specification

 Specification

Model

PSE560

(Positive pressure)

PSE561

(Vacuum pressure)

PSE563

(Compound pressure)

PSE564

(Positive pressure)

Rated pressure range 0 to 1MPa   0 to -101kPa -100 to -100kPa
0 to 500kPa  
Extension analog output range -0.1 to 0MPa
10.1 to 0kPa -50 to 0kPa
Proof pressure 1.5MPa 500kPa 500kPa 750kPa


Model PSE56□-□ PSE56□-□-28
Working medium Liquid or gas that will not corrode or attack stainless steel 316L
Power supply voltage DC12 to 24 V±10%, Ripple (p-p) 10% or less (with reverse connection protection)
Current consumption 10mA or less
Output specifications Analog output:

 1 to 5V (within rated pressure range)

 0.6 to 1V (within extension analog output range) 

Output impedance: Approx.1kΩ

Analog output: DC4 to 20 mA (within rated pressure range) 

Maximum load impedance: 500Ω or less (at DC24 V) 100Ω or less (at DC12 V)

Accuracy 

(Ambient temperature at 25℃)

±1%F.S. (within rated pressure range ), ±3%F.S. (within extension analog output range)
Linearity ±0.5% F.S.
Repeatability   ±0.2% F.S.
Power supply voltage effect   ±0.3% F.S.
Environment Enclosure IP65
Operating temperature Operating: 10 to 60℃, Stored: -20 to 70℃ (No freezing or condensation)
Operating humidity Operating/Stored: 35 to 85% RH (No condensation)
Withstand voltage AC250V for 1 minute between terminals and housing
Insulation resistance 50MΩ or more (DC 50V measured via megohmmeter) between terminals and housing
Temperature characteristics ±2% F.S. (0 to 50°C: 25°C reference), ±3% F.S. (–10 to 60°C: 25°C reference)

Sensor cable

PSE56 - : Oilproof heavy-duty vinyl cable with air tubing, 3 cores, Φ5.1, 3 m, Conductor area: 0.2 mm², Insulator O.D.: 1.12 mm

PSE56 - -28: Oilproof heavy-duty vinyl cable with air tubing, 2 cores, Φ5.1, 3 m, Conductor area: 0.2 mm², Insulator O.D.: 1.12 mm

Piping material Case: C3604 + Nickel plating, Piping port/Pressure sensor: Stainless steel 316L, Grease-free
Standards

CE marking (EMC directive/RoHS directive), UL/CSA (E216656)



 Option/Part No.

vacuum sensor



 Analog Output

digital pressure sensor

Range
Rated pressure range A B C
For vacuum pressure 0 to -101kPa 0kPa -101kPa 10.1kPa
For compound pressure -100 to 100kPa -100kPa 100kPa
For positive pressure 0 to 1MPa 0kPa 1MPa -0.1MPa
0 to 500kPa 0kPa 500kPa -50kPa


Main Dimensions

 Main Dimensions

smc sensors

The dimensions of part C are common to all PSE56 models.

* Be sure to release the air in the  air tubing of the cable to the atmosphere.  If the air tubing is restricted, or left in  environments where it is exposed to water or oil,  it cannot be detected normally


pse560 pressure sensor dimensions

Previous: 
Next: 

Product Category

Hot Product