TN Series Double-shaft Pneumatic Cylinder
1. Embedded installation and fixation mode saves installation space.
2. It has good resistance to bending and twisting movements.
3. Mounting holes on three sides facilitates multi-position mounting.
4. Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
5. Standard configuration of this series has magnet. Configuartion without magnet is not avaiable.
|Working Medium||Clean Air(40um Filteration)|
|Acting Type||Double Acting|
|Working Pressure Range||0.1∽0.9Mpa|
|Working Temperature||-5~70 °C|
|Speed Range (mm/s)||30∽500mm/s|
|Adjustable Stroke (mm)||-10~0mm|
|Cushion Type||Rubber Cushion|
|No Rotating Accuracy||0.4°||0.3°|
This category is empty.