| Working medium: | |
|---|---|
| Working temperature: | |
| Pressure adjusting range: | |
| Filter precision: | |
| Bowl material: | |
Product Description
VF filter with water separator cleans the compressed air of liquid oil, condensation and dirt particles, for special applications the 20 micron filter element can be replaced with a 5 micron filter element.
Note
* Max pressure for V Series auto drain is 0.8Mpa.
* Max pressure for the Low-pressure type is 0.4Mpa.
* G, PT and NPT threads are available.
Product Specifications
Model | VF200-01 | VF200-02 | VF200-03 | VF300-02 | VF300-03 | VF300-04 | VF400-02 | VF400-03 | VF400-04 | VF400-06 | |
| Working medium | Clean air(40μm Filteration) | ||||||||||
| Port bore | G1/8 | G1/4 | G3/8 | G1/4 | G3/8 | G1/2 | G1/4 | G3/8 | G1/2 | G3/4 | |
| Filtering precision | 25μm or 5μm | ||||||||||
| Proof pressure | 0.15 to 0.8MPa(20 to 116Psi)/0.15 to 1.2MPa(20-174Psi) | ||||||||||
| Max. Working pressure | 1.0Mpa(145Psi)/1.6MPa(230Psi) | ||||||||||
| Working temperature | 5 to 60℃ | ||||||||||
| Drain bowl capacity | 15cc | 50cc | 80cc | ||||||||
Main Dimensions
Product FAQ
Q1. What is an FRL unit？
An FRL unit comprises a filter (F), regulator (R), and lubricator (L). These individual units can combine into one unit to ensure clean air in a pneumatic system. It is also possible to use each component individually.
Q2. Should air filter be before or after regulator?
Typically, after the shutoff valve, the filter is the first component in the air line; then the regulator; and finally, the lubricator. Filters are available in different varieties to let them remove oil, particulates, water, and odors from the compressed air.
Q3. Which type of filter is used in FRL?
An FRL combines a filter, regulator, and lubricator into one component to keep air compressor systems in optimal working condition. An FRL has three primary components: Airline filter.
Q4. How do I choose an air filter regulator?
When selecting an air pressure regulator it is important to consider the range of fluctuation in the inlet pressure, as well as the required outlet pressure. The possible variation in flow rate should also be considered to ensure the regulator will not fail in the desired application.
Catalogue PDF
English
