Home / Products / Pneumatic Cylinder / Guided Cylinder / Three Shaft Guide Cylinders / MGPM Series Slide Bearing Compact Guided Pneumatic Cylinder

MGPM Series Slide Bearing Compact Guided Pneumatic Cylinder

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator's rod and seals.
The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

Model:
MGPM 25X75-S
Brand:
VPC Pneumatic

Material:	Aluminum alloy
Working pressure:	0.12~1.0Mpa
Acting type:	Double acting
Working medium:	Clean air
Availability:



Inquire Add to Basket

Product Description

■ Product Feature

MGPM compact guide cylinder is designed for high-side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder's load-bearing capacity.

■ Symbol

guided air cylinder

Product Specifications

Bore(mm)		12	16	20	25	32	40	50	63	80	100
Working medium		Clean air (40μm Filteration)
Acting type		Double acting
Proof pressure		1.5MPa
Max. Working pressure		1.0MPa
Min. Working pressure		0.12MPa		0.1MPa
Working temperature		-10 to 60℃(No freezing)
Speed range		50 to 500mm/s								50 to 400mm/s
Cushion type		Rubber bumper on both ends
Lubrication		Not required(Non-lube)
Tolerance of stroke		+1.5mm 0 mm
Non-rotating accuacy	Slide bearing	±0.08°		±0.07°		±0.06°		±0.05°		±0.08°
	Ball bushing bearing	±0.01°		±0.09°		±0.08°		±0.06°		±0.05°
Port size		M5X0.8		G1/8				G1/4		G3/8

Main Dimensions

■ Main Dimensions Φ12 to Φ25 MGPM, MGPL, MGPA

guided pneumatic cylinder

mgpm smc

*1) Refer to Section EE details for the shape of Φ12 to Φ25 with stroke of 50 or less.
*2) The use of a slot (width XA, length XB, depth 3) allows for a relaxed pin pitch tolerance, with the pin hole (ΦXAH9, depth 6) as the reference, without affecting mounting accuracy.

*3) For bore size Φ12 and Φ16, only M5×0.8 port is available.
*4) For bore size Φ20 or more, choice of Rc, NPT, G port is available.

■ Main Dimensions Φ32 to Φ63 MGPM, MGPL, MGPA

compact guide cylinder parker guided cylinder *1) The use of a slot (width XA, length XB, depth XC) allows for a relaxed pin pitch tolerance, with the pin hole (ΦXAH9, depth XL) as the reference, without affecting mounting accuracy.

*2) Choice of Rc, NPT, G port is available.

■ Main Dimensions Φ80, Φ100 MGPM, MGPL, MGPA

guided compact pneumatic cylinder mgpm cylinder *1) The use of a slot (width X6, length 7, depth 5) allows for a relaxed pin pitch tolerance, with the pin hole (Φ6H9, depth 10) as the reference, without affecting mounting accuracy.