| Valve type: | |
|---|---|
| Mounting orientation: | |
| Driving type: | |
| Standard voltage: | |
Product Description
1. Electrical entry is terminal, horizontal and vertical insertion can freely switch.
2. Inner exhaust structure, which can collect pilot airflow, and then exhaust intensively from R port.
3. High-frequency pilot head drives the valve body to work, reducing power loss.
4. Valve body aluminum alloy extrusion molding, unique technology processing of the inner hole, effectively increase the flow.
5. A variety of threaded tube types can be selected, and integrated with the base valve group to save installation space.
3G① 1② 10③ 06④ NC⑤ B⑥ 050⑦ □⑧
| ①Type code | 3G: Solenoid valve(3/2 way) | |||||
| ②Size code | 05: 0500 Series | 1: 100 Series | 2: 200 Series | 3: 300 Series | ||
| ③Coil | 10: Single control 20: Double control | |||||
| ④Port size | M5: M5 | M5: M5 | 06: 1/8" | 06: 1/8" | 08: 1/4" | 10: 3/8" |
| ⑤Type of actuation | NC: Normally closed NO: Normally opened [ Note: Double solenoid no this code ] | |||||
| ⑥Voltage | A: AC 220V B: DC 24V C: AC 110V F: DC 12V | |||||
| ⑦Line length | 050: 0.5m 200: 2.0m | |||||
| ⑧Thread type | - | Blank: PT Thread / G: G Thread / T: NPT Thread | ||||
Product Specifications
| Control type | Internal pilot |
| Valve type | 3/2 Way |
| Working medium | Clean air |
| Working temperature | -10 to 70℃ |
| Working pressure | 2 to 7bar |
| Port size | Φ3mm |
| Body material | Aluminum alloy |
| Lubrication | No |
| Max. working frequency | 5 cycles/sec |
| Coil type | Horizontal type and Vertical type |
| Standard voltage | DC24V DC12V AC110V AC220V |
| Voltage range | ±10% |
| Power | DC: 2W(with LED) AC: 2VA |
| Working frequency | ≥25Hz |
| Response time | 15ms |
| Protective structure | Dustproof |
Main Dimensions
Product FAQ
Q1. How does a 3 Way 2 position solenoid valve work?
A 3-way 2 position valve has 3 ports and two position and can be either normally closed, or normally open. A normally closed valve will open when powered and close through spring tension. A normally open valve will close when powered and open again through spring tension. The third port is typically used for venting.
Q2. What are 3 2 valves used for?
3/2-way valve have three connection ports and two positions that can be driven via a solenoid valve. They are used to control a single-action cylinder, for driving pneumatic actuators, used as a blow-off valve, as pressure release valve and in vacuum applications.
Q3. How to clean solenoid valve？
First, get a dry and soft piece of lint-free material. Use this to remove any excess moisture from housings and fittings. The point of keeping surfaces dry is to reduce corrosion and keep solenoid pneumatic valves moving smoothly for many years.
Q5. What is the difference between 3/2 way and 5/2 solenoid valve?
The first one has 2 positions with 1 inlet, 1 outlet and 1 exhaust, and the second one has 2 positions with 2 outlet, 2 exhaust and 1 inlet. Push buttons and check valves are the main uses of 5/2.
Q5. Solenoid valve troubleshoot
Check if the power supply is correct and the coil can dissipate heat by ventilation. Install a new coil and never power the coil when not mounted on the valve. Check for moisture within and replace if necessary. Replace any damaged or bent armatures as well, and check media compatibility with your valve.
English
